Before your install: Free in-home inspection, a clear written estimate, and a roofing system designed around your material selections.
Tear-off & deck
- 01Required permitsWe pull any required permit.
- 02Complete tear-offRemove all existing roofing down to the structural deck.
- 03Deck inspectionInspect every exposed board and repair or replace as needed. Board repair or replacement is priced per sheet.
Water protection
- 04Eave protectionSelf-adhering ice-and-water shield along every eave.
- 05Valley protectionIce-and-water shield in every valley, finished as a shingle valley. Upgrades available: pre-formed W-valley metal, or 24-gauge steel W-valley metal with a Kynar 500 finish.
- 06Rake-edge protectionIce-and-water shield along every rake edge.
- 07Seal roof penetrationsIce-and-water around every penetration, chimney, skylight and wall transition.
- 08Synthetic underlaymentHigh-performance synthetic underlayment everywhere else.
Edge metal
- 09Drip edgeNew aluminum drip edge along every eave and rake. Upgrade available: 24-gauge steel drip edge with a Kynar 500 finish.
Shingle system
- 10Starter shinglesMalarkey starter strip at every eave and rake.
- 11Shingle fastening4 nails per shingle, in the manufacturer's nailing zone.
Flashing
- 12Roof-to-wall flashingAll-new step flashing at every roof-to-wall transition.
- 13Chimney flashingChimney flashing and counter-flashing replaced.
- 14New pipe flashingNew flashing on every pipe.
Ridge & ventilation
- 15Matching hip & ridgeColor-matched Malarkey hip and ridge shingles.
- 16Ridge ventilationShingle-over ridge vent, planned for your home during the inspection.
Your property
- 17Property protectionLandscaping, siding, windows and driveway protected with OSB and tarps.
- 18Magnet cleanupMagnet sweep for nails during the job and again at completion.
- 19Daily cleanupDebris cleaned up at the end of each day and hauled away at completion.
- 20Final walkthroughOur production team does a final walkthrough with you and hands over your warranty documents.
Our pre-installation site visit confirms your materials and colors before install day.
